Plu Name Programming - TEC MA-600-1 series Owner's Manual

4. PROGRAMMING OPERATIONS
4.13

PLU Name Programming

A maximum of 16 characters of name of PLU which was programmed in the PLU Table Programming operation
is set here.
CONDITION
Any time outside a sale
OPERATION
Mode Lock: SET
1) Menu Tree
2) Operation Flowchart
NOTE: A maximum of 16 one-byte characters or 8 two-byte characters can be entered. A combination of
both types is also available.
Main Menu
"2 NAMES" is
selected.
"4 PLU (ITM NO.)
NAME" is selected.
Select a PLU to be
programmed.
[Enter]
Input a PLU Name.
[Enter]
[End]
4-44

4.13 PLU Name Programming

ECR is being outside a sale and in SET mode.
Depress [↓] then [Enter].
Or Depress [2].
Depress [↓] key three times then [Enter].
Or Depress [4].
Select a PLU of which name is to be
programmed with the [↑] or [↓] key.
The ECR enters character input mode.
A maximum of 16 one-byte or 8 two-byte
characters are input.
The PLU Name is entered and printed.
This setting is ended. A long receipt is issued
and the display returns to Main Menu screen.
EO1-11155