Pppoe (Point-To-Point Protocol Over Ethernet) - EnGenius ENH210 User Manual

10.1.3 PPPoE (Point-to-Point Protocol over Ethernet)

Select PPPoE as your WAN connection type if your ISP provides a Username and Password. If
the PPPoE is a DSL service, please remove the PPPoE software from your computer as the
software is not necessary with the use of the ENH210.
Internet Connection
Type
MTU
Login
Password
Service Name
Select PPPoE to begin configuration of the PPPoE connection.
Specify the Maximum Transmit Unit size. EnGenius recommends
that it remains in Auto.
Specify the Username that is given by your ISP.
Specify the Password that is given by your ISP.
Specify the Service Name that is given by your ISP.