Management Vlan - EnGenius ENH210 User Manual

Port
Save / Apply / Cancel
Pressing Save / Apply will change the settings immediately. It is not
reversible unless the settings are changed again or the device is reset.

11.2 Management VLAN

Click on the Management VLAN link under the Management menu. This option allows you
to assign a VLAN tag to packets. A VLAN is a group of computers on a network whose
software has been configured so that they behave as if they were on a separate Local Area
Network (LAN). Computers on a VLAN do not have to be physically located next to one
another on the LAN.
Management VLAN ID
Accept / Cancel
Please make note of the following:
1. Accept does not apply the changes – you must go to Status -> Save / Load to apply
the new settings. Please refer to Chapter 6.1 for more information.
2. If you reconfigure the Management VLAN ID, you may lose connection to the
ENH210. Verify the DHCP server can support the reconfigured VLAN ID, and then
re-connect to the new IP address.
if you specify the Port number is 8080, then you will need to enter
the following http://IPaddress:8080 to access the web interface.
Press Save / Apply to confirm the changes or Cancel to return
previous settings.
If your network includes VLANs and if tagged packets need to
pass through the Access Point, specify the VLAN ID in this field. If
not, select the No VLAN tag radio button.
Press Accept to confirm the changes or Cancel to return
previous settings.