Wireless Mac Filter - EnGenius ENH210 User Manual

8.4 Wireless MAC Filter

Wireless MAC Filter is used to allow or deny wireless clients, by their MAC addresses, from
accessing the network. You can manually add a MAC address to restrict the access
permission's of the client. The default setting is Disable Wireless MAC Filters.
ACL Mode
MAC Address Filter
Add
Apply
ACL Mode can deny or allow specific clients to access the
network. Select Disable, Deny MAC in the list, or Allow MAC in
the list from the drop down list.
Specify the MAC address, manually.
Press Add to add the MAC address in the table.
Press Apply to apply the changes.
0.