10.3 VPN Pass Through
VPN Pass Through is used to allow certain protocols to be tunneled through an IP network
such as PPTP and L2TP, or to implement a secure exchange of packets at the IP Layer such as
IPSec.
PPTP Pass Through
L2TP Pass Through
IPSec Pass Through
Accept / Cancel
Accept does not apply the changes – you must go to Status -> Save / Load
to apply the new settings. Please refer to Chapter 6.1 for more information.
Place a check to enable PPTP protocol passes through WAN.
Place a check to enable L2TP protocol passes through WAN.
Place a check to enable IPSec protocol passes through WAN.
Press Accept to confirm the changes or Cancel to return
previous settings.