EnGenius ENH210 User Manual page 37

SSID
VLAN ID
Suppressed SSID
Station Separation
Wireless Security
Save / Cancel
Specify the SSID for current profile. This is the wireless network
name that wireless clients will use to connect to the AP.
Specify the VLAN tag for current profile. Only use if configuring
multiple SSIDs. Must be using VLAN enabled switches on the
network.
Place a check to hide the SSID. Clients will not be able to see the
broadcast SSID in Site Survey.
Select enable to prevent clients associated to the same AP from
communicating with one another.
Please refer to the Wireless Security section.
Press Save to save the changes or Cancel to return previous
settings.