Logging Into The Enh210 - EnGenius ENH210 User Manual

1. Pull down the Apple Menu, click System Preferences, and select Network.
2. Verify that the NIC connected to the ENH210 is selected in the Show field.
3. In the Configure field on the TCP/IP tab, select Manually.
4. Click Apply Now to apply your settings and close the TCP/IP dialog box.
5. Enter an IP address (i.e. 192.168.1.10), the subnet mask of the ENH210, and the Router
which is the ENH210's IP address, 192.168.1.1. Note: the subnet mask must match that of
the ENH210 and the IP address must be on that subnet.
6. Click Apply Now to apply your settings and close the TCP/IP dialog box.

5.5 Logging into the ENH210

After completing the TCP/IP settings from the beginning of the Chapter, you can now access
the web-based configuration menu.