Wds Bridge Mode - EnGenius ENH210 User Manual

8.1.3 WDS Bridge Mode

Wireless Mode
Channel HT Mode
Extension Channel
Channel / Frequency
Accept / Cancel
Accept does not apply the changes – you must go to Status -> Save / Load
to apply the new settings. Please refer to Chapter 6.1 for more information.
The wireless mode supports 802.11b/g/n mixed modes. It is
compatible with the most common wireless bands.
The default channel bandwidth is 40 MHz. A larger channel can
provide better transmit quality and speed, while 20 MHz channel
bandwidth affords higher stability at farther distances.
Specify the upper channel or lower channel selection. It may
influence the Auto channel function
The channel availability is determined by the country's
regulations.
Press Accept to confirm the changes or Cancel to return to the
previous settings.