Understanding The Enh210 Leds - EnGenius ENH210 User Manual

1.6 Understanding the ENH210 LEDs

The rear of the ENH210 has two groups of LEDs. One group, labeled INDICATORS, shows the
status of the device. The second group, LINK QUALITY, shows the strength of the link
between the ENH210 and the network. The following table describes the ENH210 LEDs.
LED Color
Power Green
LAN1 Green(Main)
LAN2
Orange(Secondary)
WLAN Green
Link Quality See Status column
Mode Status
OFF= ENH210 is not receiving power.
ON= ENH210 is receiving power.
OFF = ENH210 is not connected to the network.
ON = ENH210 is connected to the network, but not sending or
receiving data.
Blink = ENH210 is sending or receiving data.
Access Point OFF = ENH210 radio is off and the device is not
or Client sending or receiving data over the wireless LAN.
Bridge Mode ON = ENH210 radio is on, and the device is not
sending or receiving data over the wireless LAN.
Blink = ENH210 radio is on, and the device is
sending or receiving data over the wireless LAN.
Access Point Shows the strength of the link between the
or Client ENH210 and the network.
Bridge Mode G = good quality (green).
Y = medium quality (yellow).
R = poor or no link (red).