Client Bridge Mode - EnGenius ENH210 User Manual

8.1.2 Client Bridge Mode

Wireless Mode
SSID
Site Survey
Prefer BSSID
WDS Client
Wireless Security
Accept / Cancel
Accept does not apply the changes – you must go to Status -> Save / Load
to apply the new settings. Please refer to Chapter 6.1 for more information.
The wireless mode supports 802.11b/g/n mixed operation. It is
compatible with the most common known wireless bands.
Specify the SSID if known. The SSID text box will be automatically
filled in when an AP in the Site Survey is selected.
Use Site Survey to scan nearby APs, and then select the AP to
establish a connection.
Specify the MAC address, if known. The Prefer BSSID check box
will be automatically filled in when an AP in the Site Survey is
selected. Used when multiple access points in a wireless
network broadcast the same SSID.
Select a Radio button to Enable / Disable WDS Client.
Please refer to Chapter 6.2 for details.
Press Accept to confirm the changes or Cancel to return
previous settings.