Network Configuration Examples; Access Point - EnGenius ENH210 User Manual

12 Network Configuration Examples

This chapter describes the role of the ENH210 with 4 modes. The Access Point mode's default
configuration is a central unit of the wireless network or as a root device of the wired
environment. Repeater Mode requires additional configuration.

12.1 Access Point

Access Point
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
For more advanced settings, please refer to the previous chapters.
Wireless Client
Step 1
Step 2
Step 3
Step 4
Login to the web-based configuration interface with default IP
192.168.1.1
Select your country or region's regulation.
Use site survey to scan channels of the nearby area.
Select a channel with less interference.
Specify the SSID for your broadcast SSID and you can also
configure multiple SSID at the same time.
Verify VLAN identifier in order to separate services among clients
Setup the authentication settings.
Select Apply to process all of the configurations.
Select the Wireless Mode you would like to associate with.
Use Site Survey to scan for nearby Access Points and select the
AP that you would like to connect with or enter the SSID
manually.
Configure VLAN ID in your wireless device if available.
Select the correct authentication type and password.