Table of Contents
Advertisement
11b/g Wireless SOHO Router
3 Web Configuration
3.1 Logging In
To configure the device through the web-browser, enter the IP address of the Bridge
(default: 192.168.1.1) into the address bar of the web-browser and press Enter.
Make sure that the device and your computers are configured on the same subnet.
Refer to Chapter 2 in order to configure the IP address of your computer.
After connecting to the IP address, the web-browser will display the login page.
Specify the User Name and Password. The User name and password are set to
admin by default, click on the Login or OK button.
After logging in you will graphical user interface (GUI) of the device. The navigation
drop-down menu on left is divided into four main sections:
1.
Management: This menu includes the administrator settings, advanced wireless
settings such as wireless MAC clone and RTS/fragmentation threshold. Also
included are other system related settings such as firmware upgrade, reset to
factory defaults, and system date/time configuration.
TCIP/IP: This menu includes the configuration of the LAN port and settings for the
2.
LAN IP, subnet mask, default gateway and DHCP client. Also, included are the
settings for the WAN connection
Wireless: This menu includes the settings such as network type (infrastructure/ad-
3.
hoc), data rate, and security.
Firewall: This menu displays the security settings such as MAC filter, content filter,
4.
port blocking and DoS protection.
Version 1.0
10
Advertisement
Table of Contents
