Configuring Basic Vpn Settings - Cisco CVR100W Administration Manual

Configuring VPN
Configuring Basic VPN Setup
STEP 3
STEP 1
STEP 2
Cisco CVR100W Wireless-N VPN Router Administration Guide
Diffie-Hellman (DH)
Group
SA-Lifetime
Basic VPN Setup Default Values for VPN
Encryption Algorithm
Integrity Algorithm
SA-Lifetime
PFS Key Group
Click Back to return to the Basic VPN Setup page.

Configuring Basic VPN Settings

To configure basic VPN settings for a site-to-site connection:
Choose VPN > Basic VPN Setup.
Enter the following information:
Policy Name and Remote IP Type
Policy Name
Pre-Shared Key
Endpoint Information
Remote Endpoint
Remote WAN
(Internet) IP Address
Group2 (1024 bit)
8 Hours
AES-128
SHA-1
1 Hours
DH-Group 2 (1024 bit)
Enter a unique name for the VPN policy. The VPN
policy name cannot be same as the username of an
existing VPN client.
Enter the pre-shared key, or password, that will be
exchanged between the two routers. It must be
between 8 and 49 characters.
Choose the way that the remote endpoint, or the router
to which the CVR100W will connect, is identified by IP
address or FQDN (Fully-qualified Domain Name).
Enter the public IP address or domain name of the
remote endpoint.
6
102