Chapter 3: Configuring Network; Configuring Wan Settings - Cisco CVR100W Administration Manual

Wireless-n vpn router
Hide thumbs Also See for CVR100W:
Table of Contents

Advertisement

Configuring Network

Configuring WAN Settings

Cisco CVR100W Wireless-N VPN Router Administration Guide
This chapter describes how to configure the CVR100W's network settings. It
includes the following sections:
Configuring WAN Settings
Configuring LAN Settings
Configuring Routing
Configuring Dynamic DNS
Configuring IP Mode
Configuring IPv6
Configuring WAN properties for an IPv4 network differs depending on which type
of Internet connection that you have.
The Internet Setup page allows you to configure how to connect the WAN
interface to the Internet. The CVR100W supports four types of Internet
connections:
Configuring Automatic Configuration (DHCP)
Configuring PPPoE
Configuring Static IP
Configuring Optional Settings
Sometimes, you may need to set the MAC address of the CVR100W's WAN port to
be the same MAC address as your PC's or some other MAC address.
Cloning the MAC Address
3
38

Advertisement

Table of Contents
loading

Table of Contents