Configuring Port Range Forwarding - Cisco CVR100W Administration Manual

Configuring Firewall

Configuring Port Range Forwarding

STEP 4
STEP 5
STEP 6
STEP 7
STEP 8
Configuring Port Range Forwarding
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
STEP 8
Cisco CVR100W Wireless-N VPN Router Administration Guide
In the Internal Port field, enter the port number used by the remote system to
respond to the request it receives.
From the Protocol drop-down menu, choose a protocol (TCP, UDP, or TCP &
UDP).
In the IP Address field, enter the IP address.
In the Enable field, check the box to enable the rule.
Click Save.
To add a port range forwarding rule:
Choose Firewall > Port Range Forwarding.
In the Service Name field, enter the name of the service to configure port
forwarding.
In the Start Port field, specify the port number that begins the range of ports to
forward.
In the End Port field, specify the port number that ends the range of ports to
forward.
From the Protocol drop-down menu, choose a protocol (TCP, UDP, or TCP &
UDP).
In the IP Address field, enter the IP address.
In the Enable field, check the box to enable the rule.
Click Save.
5
96