Configuring Bonjour - Cisco CVR100W Administration Manual

Administering Your CVR100W

Configuring Bonjour

STEP 6
STEP 7
Configuring Bonjour
STEP 1
STEP 2
STEP 3
STEP 4
Cisco CVR100W Wireless-N VPN Router Administration Guide
• To use a specific NTP server, click the User Defined NTP Server radio
button and enter the fully-qualified domain name (FQDN) or IP address of the
NTP servers in the two available fields.
If you choose Manual to set the system time, enter the date and time in the
Manually Set System Time fields.
Click Save.
Bonjour is a service advertisement and discovery protocol. On the CVR100W, it
only advertises the default services configured on the device when Bonjour is
enabled.
To enable Bonjour:
Choose Administration > Bonjour.
Check Enable to enable Bonjour.
To enable Bonjour for a VLAN listed in the Bonjour Interface Control table, check
the corresponding Enable Bonjour box.
You can enable Bonjour on specific VLANs. Enabling Bonjour on a VLAN allows
devices present on the VLAN to discover Bonjour services available on the router
(such as http/https).
For example, if a VLAN is configured with an ID of 2, devices and hosts present on
VLAN 2 cannot discover Bonjour services running on the router unless Bonjour is
enabled for VLAN 2.
Click Save.
8
125