Viewing Vpn Status - Cisco CVR100W Administration Manual

Viewing CVR100W Status

Viewing VPN Status

STEP 2
Viewing VPN Status
STEP 1
STEP 2
Cisco CVR100W Wireless-N VPN Router Administration Guide
Time Left
Status
To manually disconnect the guest connection, click Disconnect.
The VPN Status page displays the status of client-to-gateway VPN connections.
To view VPN user connection status:
Choose Status > VPN Status.
The VPN User Connection Status table displays the following information:
Username
Remote IP
Status
Start Time
End Time
Duration (Seconds)
Protocol
To manually terminate a VPN session, click Disconnect.
Time left for the guest connection.
Shows if the device is connected to the Internet using
the CVR100W.
Username of the VPN user associated with the
QuickVPN tunnel.
IP address of the remote QuickVPN client. This could
be a NAT/Public IP if the client is behind the NAT router.
Current status of QuickVPN client. OFFLINE means that
the QuickVPN tunnel is not initiated or established by
the VPN user. ONLINE means that the QuickVPN tunnel,
initiated or established by the VPN user, is active.
Time of the VPN user establishing a connection.
Time of the VPN user ending a connection.
Duration between the VPN user establishing and
ending a connection.
Protocol that the user uses, such as QuickVPN.
2
32