Configuring Port Management - Cisco CVR100W Administration Manual

Administering Your CVR100W

Configuring Port Management

Configuring Port Management
STEP 1
STEP 2
STEP 3
STEP 4
Cisco CVR100W Wireless-N VPN Router Administration Guide
Use the Port Management page to configure the duplex mode and speed for the
physical ports and control the flow on the ports.
To configure port management:
Choose Administration > Port Management.
The following information is displayed:
• Port: Displays the port type and port identification.
• Link: Shows if the link through the port is up or down.
• Mode: Displays the current duplex mode and speed.
• Flow Control: Shows if flow control is enabled or disabled on the port.
To configure the duplex mode and speed of a port, choose an option from the
Mode drop-down menu. The available options are:
• Auto Negotiation: Lets the system and network determine the optimal port
speed.
• 10 Mbps Half Duplex or 100 Mbps Half Duplex: The 10/100 Mbps port
supports transmissions between the device and the client in only one
direction at a time.
• 10 Mbps Full Duplex or 100 Mbps Full Duplex: The 10/100 Mbps port
supports transmissions between the device and the client in both directions
simultaneously.
To control the flow on a port, check the Flow Control box on that port.
Click Save.
8
123