Configuring Basic Wireless Settings; Configuring Wireless Radio Settings - Cisco CVR100W Administration Manual

Configuring Wireless Network

Configuring Basic Wireless Settings

Configuring Basic Wireless Settings
STEP 1
STEP 2
STEP 3
STEP 4
Cisco CVR100W Wireless-N VPN Router Administration Guide
SSID Name cisco-xxxx
SSID Isolation Disabled
WMM Enabled
WPS Enabled
Hardware
Button
The Basic Settings page allows you to configure basic wireless settings.

Configuring Wireless Radio Settings

To configure the wireless radio settings:
Choose Wireless > Basic Settings.
In the Radio field, check Enable to turn the wireless radio on.
This field enables the wireless radio itself. By default there is only one wireless
network enabled, cisco-xxxx.
In the Wi-Fi Power field, select the Wi-Fi power on your network.
In the Wireless Network Mode field, choose one of these options from the
drop-down menu:
B/G/N-Mixed Choose this option if you have Wireless-N, Wireless-B, and
Wireless-G devices in your network. This is the default setting
(recommended).
B-Only Choose this option if you have only Wireless-B devices in your
network.
G-Only Choose this option if you have only Wireless-G devices in
your network.
N-Only Choose this option if you have only Wireless-N devices in your
network.
cisco-SSID2 cisco-SSID3
Disabled Disabled
Enabled Enabled
Disabled Disabled
4
cisco-guest
Enabled
Enabled
Disabled
68