Fisher & Paykel DishDrawer DD247 Service Manual page 35

35
5.2.4 Fast Cycle Mode (FC)
1. Press the PROGRAM button to skip to the Continous Cycle Mode (CC), or.
2. Press START/PAUSE button to start the FAST CYCLE (FC) and close the wash tub.
3. The product will start an 8 minute test cycle, and the following devices are tested:
• lid motors
• Fill valve
• Detergent diverter
• Wash motor
• Element
• Drain motor
• Drying fan
4. Press and hold the START /PAUSE button for 5 seconds to exit the FC mode and return to standby USER
SETUP FUNCTION mode.
5.2.5 Continous Cycle Mode (CC)
1. Press the PROGRAM button to exit the standby mode.
2. Press START/PAUSE button and shut the tub to repeatedly run the currently selected wash program.
Note: to exit any mode at any time, push and hold the START/PAUSE button for 5 seconds.