Fisher & Paykel DishDrawer DD247 Service Manual page 29

To enter the menu: press
release.
You are now in the Rinse aid option of the preference options menu.
29
If you want to change the Rinse aid setting, go to step 3 now.
If you want to change the setting of another option, you will need to scroll to that option first.
To scroll to the next option: press
When you have scrolled to the end of the sequence, it will start again with Rinse aid (after the lower tone).
Option
Possible settings
NZ, AU, US, CA
Secondary
Example
Panel
To scroll to the next user option press the
CHANGE SETTING
3
You are now in the end of cycle beeps setting of the preference options menu.
Press to change the setting within an option. For example, to change the Rinse aid setting from 4 (factory default) to 2, you need
To change the setting press the
to press 3 times.
off.
SAVE SETTING & QUIT MENU
4
Press and hold until a beep sounds and the control panel reverts to showing the wash program currently selected.
To save or quit the menu, press and hold the
*This option is disabled on models without water softener. It appears in the sequence of options but cannot be adjusted.
showing the wash program currently selected.
* This option is disabled on models without a water softener, the option will appear in the sequence of options
For more info
but cannot be adjusted. (refer to previous page)
For detailed information on the
features of your dishwasher
Closed Drawer autolock using the remote control
For warranty information
The Closed Drawer autolock feature will lock the dishwasher when the drawer is closed. To enable this feature - with the drawer closed
(and no wash program or delay start is active), press and hold
together. Ignore any beeps prior to the 6 seconds. The drawer is now locked. To unlock, press
If you...
together. The drawer is now unlocked.
have any questions or comments
On double products, the drawers must be locked independently.
need a Fisher & Paykel authorized
technician to service your product
If the power to the dishwasher is disconnected, the drawer will remain locked.
need replacement parts or accessories
Note: this feature is highly recommended if the dishwasher is to be used in motor homes.
want to register your product
Preference options
You can change the setting of these options to suit your preferences or circumstances. We recommend selecting the most suitable
settings before you start using your dishwasher.
Option
Regulates the amount of rinse aid
dispensed. Reduce this setting if there is
What does it do? excess foam after a wash. Increase this
setting if dishes are wet or streaky after
a wash.
How to change the setting of an option
CHECK & OPEN
1
Check that there is no wash underway, then open the drawer.
ENTER MENU & SCROLL TO OPTION
2
To enter the menu: press
release.
You are now in the Rinse aid option of the preference options menu.
If you want to change the Rinse aid setting, go to step 3 now.
If you want to change the setting of another option, you will need to scroll to that option first.
To scroll to the next option: press
When you have scrolled to the end of the sequence, it will start again with Rinse aid (after the lower tone).
Option
Possible settings
Example
4 indicators lit = setting is 4
first with one finger, then
. To know which option you're in, keep track of the sequence of options using the table below.
Rinse aid
1 to 5
4 indicators lit = setting is 4
button, all LED's on = end of cycle beeps on, all LED's off = end of cycle beeps
see your 'User guide'
see your 'Service and warranty' booklet
see your 'Service and warranty' booklet or contact us
NZ
AU
USA
CA
Rinse aid
first with one finger, then
. To know which option you're in, keep track of the sequence of options using the table below.
Rinse aid
1 to 5
with another finger, hold both until one long beep sounds, then
Water softener*
0 to 5
3 indicators lit = setting is 3
button.
button until a beeps sounds and the control panel reverts to
on the remote for 6 seconds until you hear a sequence of 4 beeps
0800 372 273
toll-free, 24/7
1300 650 590
toll-free, 24/7
1 888 936 7872
toll-free, 24/7
1 888 936 7872
toll-free, 24/7
Water softener*
Refer to the 'Water softener'
section of the 'User guide' for
details.
with another finger, hold both until one long beep sounds, then
Water softener*
0 to 5
3 indicators lit = setting is 3
Beeps at end of wash
On/Off
On
Off
once. You will hear a sequence of 4 beeps
www.fisherpaykel.co.nz
www.fisherpaykel.com.au
www.fisherpaykel.com
www.fisherpaykel.ca
Beeps at end of wash
Your dishwasher is factory-set to beep
six times at the end of a wash. You can
turn this setting off.
Beeps at end of wash
On/Off
On
Off
590194A 10.11