Using the headset system
22
Using the headset system
Charging the headset rechargeable battery
If you charge the rechargeable battery for the first time, allow charging for
at least 20 minutes without interruption. A complete charging process
takes about 60 minutes. You can interrupt charging at any time without
damaging the rechargeable battery.
Operating time with a fully charged rechargeable battery:
Talk time/standby time
12 hours
8 hours
4 days
To charge the rechargeable battery of the Pro1/Pro2 headset:
Place the headset into the magnetic holder of the base station.
The HEADSET LED
lights up blue and the CHARGE STATUS LED
indicates the battery charge:
LED segment*
Battery charge
1
0-25%
2
25-50%
3
50-75%
4
75-100%
* during charging, each segment gets brighter in 5 steps
After completion of the charging process, the HEADSET LED
Pro1
To stop the charging process:
Take the headset out of the base station.
The CHARGE STATUS LED
the headset.
Mode
narrowband mode (see page 21)
wideband mode (see page 21)
standby mode
Required charging time
approx. 10 min
approx. 10 min
approx. 20 min
approx. 20 min
4
´
´
indicates the remaining battery charge of
´
total:
approx.
60 min
goes off.
Pro2