Sennheiser DW Pro1 Instruction Manual page 12

¹
³
»
Connecting the base station to the mains power supply
The base station is ready for operation as soon as it is connected to
the mains power supply.
Connect the DC IN connector
socket ¹.
Plug the power supply unit
¿
The LINK LED lights up red. The LED of the last used mode button
»
(PHONE or PC
When using the headset system only in
the PC via the USB cable is sufficient to power the base station. For
charging the rechargeable battery within the specified charging
times (see page 22) and for use in
¿
unit is required.
Connecting the base station to a fixed line phone
If your telephone features a headset socket for connecting the electronic
call control, please use this socket.
To connect the base station to a fixed line phone, choose one of the follow
options:
Possibility Connection
A to a fixed line phone
B to a fixed line phone
C
of an optional mechanical handset lifter
(with connection possibilities
D to an optional electronic hook switch control (EHS)
Choose your connection possibility and proceed as described under
B C D
or on the following pages.
,
For additional information on the individual settings for the
headset system via the DIP switch row ¸, refer to page 20.
Putting the headset system into operation
of the power supply unit to the
into a wall socket.
³) lights up white.
PC mode, the power from
Phone mode, the power supply
without headset socket
with headset socket
A B
and only)
DC IN
A
,
11