Putting The Headset Into Operation - Sennheiser DW Pro1 Instruction Manual

Putting the headset system into operation
50%
100%
16

Putting the headset into operation

The microphone boom of the Pro1/Pro2 headset can be swiveled, allowing
the microphone to be worn on the left or right-hand side (see page 24).
20 min
Before using the headset for the first time, charge the rechargeable
1 h battery for at least 20 minutes (see page 22).
Labeling the headset
The name plate
Change the lettering of the name plate as shown.
The "Nameplate-template.pdf" PDF file included on the CD ROM
allows you to create and print individual name plates.
3
Swapping the assignment of the AUDIO button
The assignment of the AUDIO button
whether you wear the headset on the right or left ear. By default, the
headset is configured for wearing on the right ear. Pushing the AUDIO
button backwards increases the volume, pushing it forwards reduces
the volume (see page 29).
To swap the assignment of the AUDIO button
Simultaneously press and hold the headset's LINK button
AUDIO button
The HEADSET LED
allows you to label the headset.
can be swapped depending on
for 5 seconds.
flashes blue/red.
3
:
and