Calling Via The Pc Using The Headset - Sennheiser DW Pro1 Instruction Manual

Using the headset system
26
Ending a call
Disconnect the wireless link between headset and base station (see
page 23).
If you are using handset lifter/electronic hook switch, the call is auto-
matically ended.
If you are not using a handset lifter/electronic hook switch:
Hang up the handset or press the "end call" button on your fixed line
phone.
Transferring a call from the headset to the fixed line phone and vice versa
This function is only available if you are not using a handset lifter/elec-
tronic hook switch or if your telephone supports this function.
If a wireless link is established (see page 23):
Speak into the headset.
If no wireless link is established (see page 23):
Speak into the handset.

Calling via the PC using the headset

Accepting an incoming PC call
If you receive a call on your softphone:
Establish a wireless link between headset and base station (see page 23).
If the call control function of your softphone is supported, the call is
automatically accepted (see page 15).
If your softphone does not
Accept the call using your softphone.
If you receive a call and the call control function of your softphone
is supported by the
ring tone in the headset and the LED of the PC button
white.
support call control:
HeadSetup software (see page 15), you hear a
³
flashes