Testing The Headset System In Pc Mode And Adjusting It - Sennheiser DW Pro1 Instruction Manual

Testing the headset system in
Testing the PC connection
When Phone mode is selected (the LED of the PHONE button
white):
³
Press the PC button
The base station is set to
lights up white.
Press either the LINK button
on the base station.
A wireless link is established between the headset and the base
¿
station, the LINK LED
blue.
³
Use your softphone to make a call to someone who will help you adjust
the correct microphone sensitivity for
The system is correctly connected if the other party can hear you at a
comfortable level.
Adjusting the microphone sensitivity
Depending on the operating system used, adjust the microphone sensi-
tivity so that the other party can hear you at a comfortable level (see
the instruction manual of your operating system).
Some softphones provide automatic adjustment of the microphone
sensitivity. If possible, activate this function in order to be able to
use the headset microphone to the full.
Putting the headset system into operation
PC mode and adjusting it
on the base station.
PC mode and the LED of the PC button
on the headset or the PC button
lights up blue and the HEADSET LED
¿
4
5
PC mode (see below).
»
lights up
³
³
flashes
19