Putting the headset system into operation
10
Putting the headset system into
operation
Putting the base station into operation
You can use the headset system with your fixed line phone
and/or your PC
(PC
mode). The base station controls the wireless commu-
nication between the products.
Removing/attaching the cover
To remove the cover:
Remove the cover
by inserting a finger into the recess as shown.
To attach the cover and to secure the connected cables:
Replace the cover
to the rear of the base station (see diagram).
Tilt the cover
upwards until it locks into place.
(Phone
mode)