Page 1
Sennheiser DW Office / DW Pro1 / DW Pro2 Set up information. What should be in the box: Base station Headset Office) Headband & Ear Loop (DW Office) Headset on fixed headband Pro1 and DW Pro2) Power plug Connection cable (with...
Page 2
Telephones with no headset ports The connecting cable with the green sticker on one end needs to be plugged into the Phone port on the base station (green in colour). Then unplug the curly cable on the receiver of your telephone and plug the other end of the connecting cable into the receiver port on the telephone.
Page 3
To activate the headset when off the base station you will need to press the S button on the earpiece, this will activate a blue light on the base station. A speaker key or dedicated headset button on the telephone key pad will now act as the answer / end call button There is a little black switch on the end of headset earpiece this controls the volume of the headset by...