Ip Static Route Screen - ZyXEL Communications NBG-419N User Manual

Chapter 17 Static Route

17.3 IP Static Route Screen

Click Network > Static Route to open the IP Static Route screen.
Figure 100 Network > Static Route
The following table describes the labels in this screen.
Table 62 Network > Static Route
LABEL
Static Routing Settings
Route Name
Destination IP
Address
IP Subnet
Netmask
Gateway IP
Address
Metric
Add Rule
Application Rules Summary
No.
Active
Name
Destination
Gateway
134
DESCRIPTION
Enter a the name that describes or identifies this route.
Enter the IP network address of the final destination.
This is the subnet to which the route's final destination belongs.
Enter the the IP address of the gateway.
Assign a number to identify the route.
Click this to add the IP static route.
This is the number of an individual static route.
The rules are always on and this is indicated by the icon.
This is the name that describes or identifies this route.
This parameter specifies the IP network address of the final destination. Routing is
always based on network number.
This is the IP address of the gateway. The gateway is a router or switch on the
same network segment as the device's LAN or WAN port. The gateway helps
forward packets to their destinations.
NBG-419N User's Guide