Table 31 WISP Mode: LAN > General Screen (continued)
LABEL
Apply
Reset
9.5.0.1 No Security
Use this screen if the access point to which you want to connect does not use encryption.
Figure 54 No Security (WISP)
The following table describes the labels in this screen.
Table 32 No Security (WISP)
LABEL
Wireless Setup
Network Name
(SSID)
Security
Security Mode
Apply
Reset
NBG-419N User's Guide
DESCRIPTION
Click Apply to save your changes back to the NBG-419N.
Click Reset to reload the previous configuration for this screen.
DESCRIPTION
Enter the name of the access point to which you are connecting.
Select No Security in this field.
Click Apply to save your changes back to the NBG-419N.
Click Reset to reload the previous configuration for this screen.
Chapter 9 WISP Mode
71