What You Need To Know; General Screen; Advanced Screen - ZyXEL Communications NBG-419N User Manual

Chapter 21 Bandwidth Management

21.3 What You Need To Know

The sum of the bandwidth allotments that apply to the WAN interface (LAN to WAN, WLAN to WAN)
must be less than or equal to the Upstream Bandwidth that you configure in the Bandwidth
Management Advanced screen
The sum of the bandwidth allotments that apply to the LAN interface (WAN to LAN, WAN to WLAN)
must be less than or equal to the Downstream Bandwidth that you configure in the Bandwidth
Management Advanced screen

21.4 General Screen

Use this screen to have the NBG-419N apply bandwidth management.
Click Management > Bandwidth MGMT to open the bandwidth management General screen.
Figure 107 Management > Bandwidth Management > General
The following table describes the labels in this screen.
Table 67 Management > Bandwidth Management > General
LABEL
Enable Bandwidth
Management
Apply
Reset

21.5 Advanced Screen

Use this screen to configure bandwidth management rules for the pre-defined services or
applications.
You can also use this screen to configure bandwidth management rule for other services or
applications that are not on the pre-defined list of NBG-419N. Additionally, you can define the
source and destination IP addresses and port for a service or application.
148
(Section 21.5 on page
Section 21.5 on page
DESCRIPTION
This field allows you to have NBG-419N apply bandwidth management.
Enable bandwidth management to give traffic that matches a bandwidth rule
priority over traffic that does not match a bandwidth rule.
Enabling bandwidth management also allows you to control the maximum or
minimum amounts of bandwidth that can be used by traffic that matches a
bandwidth rule.
Click Apply to save your customized settings.
Click Reset to begin configuring this screen afresh.
148).
148.
NBG-419N User's Guide