7.1 Overview
The NBG-419N is set to router mode by default. Routers are used to connect the local network to
another network (for example, the Internet). In the figure below, the NBG-419N connects the local
network (LAN1 ~ LAN4) to the Internet.
Figure 40 NBG-419N Network
Note: The Status screen is shown after changing to the Expert mode of the Web
Configurator. It varies depending on the device mode of your NBG-419N.
7.2 What You Can Do
Use the Status screen
419N.
NBG-419N User's Guide
C
Modem
(Section 7.3 on page
53) to view read-only information about your NBG-
H A PT ER
Router Mode
7
52