Wps Screen - ZyXEL Communications NBG-419N User Manual

11.8 WPS Screen

Use this screen to enable/disable WPS, view or generate a new PIN number and check current WPS
status. To open this screen, click Network > Wireless LAN > WPS tab.
Figure 75 Network > Wireless LAN > WPS
The following table describes the labels in this screen.
Table 44 Network > Wireless LAN > WPS
LABEL
WPS Setup
Enable WPS
PIN Number
Status
Status
Release
Configuration
802.11 Mode
SSID
Security
Apply
Refresh
NBG-419N User's Guide
DESCRIPTION
Select this to enable the WPS feature.
This displays a PIN number last time system generated. Click Generate to
generate a new PIN number.
This displays Configured when the NBG-419N has connected to a wireless
network using WPS or when Enable WPS is selected and wireless or wireless
security settings have been changed. The current wireless and wireless security
settings also appear in the screen.
This displays Unconfigured if WPS is disabled and there are no wireless or
wireless security changes on the NBG-419N or you click
Release_Configuration to remove the configured wireless and wireless
security settings.
This button is only available when the WPS status displays Configured.
Click this button to remove all configured wireless and wireless security settings
for WPS connections on the NBG-419N.
This is the 802.11 mode used. Only compliant WLAN devices can associate with
the NBG-419N.
This is the name of the wireless network.
This is the type of wireless security employed by the network.
Click Apply to save your changes back to the NBG-419N.
Click Refresh to get this screen information afresh.
Chapter 11 Wireless LAN
97