27.1 Overview
This chapter shows you how to upload a new firmware, upload or save backup configuration files
and restart the NBG-419N.
27.2 What You Can Do
Use the Firmware screen
27.3 Firmware Upload Screen
Find firmware at
extension, e.g., "NBG-419N.bin". The upload process uses HTTP (Hypertext Transfer Protocol) and
may take up to two minutes. After a successful upload, the system will reboot.
Click Maintenance > Firmware Upgrade. Follow the instructions in this screen to upload
firmware to your NBG-419N.
Figure 126 Maintenance > Firmware Upgrade
The following table describes the labels in this screen.
Table 77 Maintenance > Firmware Upgrade
LABEL
File Path
Browse...
Upload
NBG-419N User's Guide
(Section 27.3 on page
www.zyxel.com
in a file that (usually) uses the system model name with a "*.bin"
DESCRIPTION
Type in the location of the file you want to upload in this field or click Browse... to
find it.
Click Browse... to find the .bin file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
Click Upload to begin the upload process. This process may take up to two
minutes.
C
HAPTER
Firmware Upgrade
172) to upload firmware to your NBG-419N.
2 7
172