Resetting The Nbg-419N; Procedure To Use The Reset Button - ZyXEL Communications NBG-419N User Manual

Note: You can also edit the timezone in

3.3 Resetting the NBG-419N

If you forget your password or IP address, or you cannot access the Web Configurator, you will need
to use the RESET button at the back of the NBG-419N to reload the factory-default configuration
file. This means that you will lose all configurations that you had previously saved, the password
will be reset to "1234" and the IP address will be reset to "192.168.1.1".

3.3.1 Procedure to Use the Reset Button

Make sure the power LED is on.
1
Press the RESET button for longer than 1 second to restart/reboot the NBG-419N.
2
Press the RESET button for longer than five seconds to set the NBG-419N back to its factory-
3
default configurations.
NBG-419N User's Guide
Chapter 3 Introducing the Web Configurator
Section 26.3 on page 169.
33