Static Route; Chapter 16 Static Route; Overview; Ip Static Route Screen - ZyXEL Communications NBG6716 User Manual

16.1 Overview

This chapter shows you how to configure static routes for your NBG6716.
The NBG6716 usually uses the default gateway to route outbound traffic from computers on the
LAN to the Internet. To have the NBG6716 send data to devices not reachable through the default
gateway, use static routes.
For example, the next figure shows a computer (A) connected to the NBG6716's LAN interface. The
NBG6716 routes most traffic from A to the Internet through the NBG6716's default gateway (R1).
You create one static route to connect to services offered by your ISP behind router R2. You create
another static route to communicate with a separate network behind a router R3 connected to the
LAN.
Figure 86 Example of Static Routing Topology
A
R3

16.2 IP Static Route Screen

Click Network > Static Route to open the Static Route screen.
NBG6716 User's Guide
C
LAN
WAN
HAPTER

Static Route

R1
R2
1 6
139