Connect To Internet - ZyXEL Communications NBG-419N User Manual

Chapter 2 Connection Wizard

2.3 Connect to Internet

The NBG-419N offers five Internet connection types. They are Static IP, DHCP, PPPoE, PPTP or
L2TP. The wizard attempts to detect which WAN connection type you are using.
Figure 5 Detecting your Internet Connection Type
If the wizard does not detect a connection type, you must select one from the drop-down list box.
Check with your ISP to make sure you use the correct type.
Note: If you get an error message, check your hardware connections. Make sure your
Internet connection is up and running.
The following screen depends on your Internet connection type. Enter the details provided by your
Internet Service Provider (ISP) in the fields (if any).
Internet Connection Type
Figure 6
Your NBG-419N detects the following Internet Connection type.
Table 3 Internet Connection Type
CONNECTION TYPE
Static IP
DHCP
PPPoE
PPTP
L2TP
20
DESCRIPTION
Select the Static IP if an administrator assigns the IP address of your
computer.
Select the DHCP (Dynamic Host Configuration Protocol) option when the
WAN port is used as a regular Ethernet.
Select the PPPoE (Point-to-Point Protocol over Ethernet) option for a dial-up
connection.
Select the PPTP (Point-to-Point Tunneling Protocol) option for a dial-up
connection, and your ISP gave you an IP address and/or subnet mask.
Select the L2TP (Layer 2 Tunnel Protocol) if you are connecting to another
device over another network (like the Internet or VPN).
NBG-419N User's Guide