General Fax Send Settings; Activate Fax Number Confirmation; Enable Pc Fax Send - HP CC487-91209 Fax Manual

Fax Send Setup
●
Fax Dialing Settings
●
3. Touch the
4. Type your dialing prefix number on the keypad and then touch the
5. Touch the

General fax send settings

Use the General Fax Send Settings
Fax Number Confirmation
●
PC Fax Send
●
Fax Header
●
JBIG Compression
●
Error Correction Mode
●

Activate Fax Number Confirmation

When fax number confirmation is enabled, the fax number must be entered twice to ensure that it was
entered correctly. The default setting for this feature is Disabled.
1. From the Home screen, scroll to and touch the
2. Open the following menus:
Fax Settings
●
Fax Send Settings
●
Fax Send Setup
●
General Fax Send Settings
●
3. Touch the
4. Touch the

Enable PC fax send

Use the PC fax send feature to send faxes from a PC. This feature is enabled by default. If this
feature is disabled, use the following steps to enable:
NOTE: The PC fax send driver must be installed on the computer from where the faxes will be sent.
1. From the Home screen, scroll to and touch the
2. Open the following menus:
Fax Settings
●
Fax Send Settings
●
ENWW
Dialing Prefix text box to display the keypad.
Save button.
menu to configure the following features:
Fax Number Confirmation
Save button.
Administration
box to enable fax number confirmation.
Administration
OK button.
button.
button.
Fax settings 83