Default job options
The following default job options are available for configuration:
Notification
●
Stamp Received Faxes
●
Fit to Page
●
Paper Selection
●
Output Bin
●
Sides
●
NOTE:
Default job option settings are shared across all fax methods; analog, LAN, and internet fax.
Change notification settings
Notification selects when and how you are notified of the status of an outgoing fax. This setting
applies to the current fax only. To change the setting permanently, change the default setting.
1.
On the control panel, touch the
2.
Touch
3.
Touch Notification.
4.
Select a notification setting:
Touch
●
Touch
●
Touch
●
5.
Touch
6.
If you selected Print, touch
-or-
If you selected E-mail, use the keyboard to type an e-mail address. Then touch
the notification setup.
Stamp received faxes (incoming faxes)
The stamp received faxes setting enables or disables stamping incoming faxes. The stamp prints the
received date, time, phone number, and page number on each incoming page.
1.
On the control panel, scroll to and touch the
menu.
2.
Touch
3.
Touch
4.
Touch
30
Chapter 2 HP Color LaserJet CM3530 MFP Series
More
Options.
None
to turn off notification.
This job
to enable notification for the current job.
On error
to enable error notification only for the current job.
Print
to receive a printed notification, or touch
OK
Default Job Options
and then
Fax Receive
to see the Fax Receive setting.
Stamp Received Faxes
Fax
icon to open the Fax screen.
E-mail
to complete the notification setup.
Administration
Default Fax
Options.
to see the settings.
to receive an e-mail notification.
OK
icon to open the Administration
to complete
ENWW