Blank Page Suppression; Billing Codes; Set Billing Codes - HP CC487-91209 Fax Manual

3. Touch one of the following options:
Job Build off
●
Job Build on
●
4. Touch the

Blank page suppression

Use the Blank page suppression feature to prevent blank pages in a fax from being printed.
1. From the Home screen, scroll to and touch the
2. Open the following menus:
Fax Settings
●
Fax Send Settings
●
Default Job Options
●
Blank Page Suppression
●
3. Touch one of the following options:
Disabled
●
Enabled
●
4. Touch the

Billing codes

Set billing codes

The billing-code setting, when enabled, prompts the user to enter a number when sending a fax. This
number is placed in the billing-code report. To view the billing-code report, either print the report or
query it by using an application.
Billing codes are disabled by default. Follow these steps to enable billing codes:
1. From the Home screen, scroll to and touch the
2. Open the following menus:
Fax Settings
●
Fax Send Settings
●
Fax Send Setup
●
Billing Codes
●
3. Touch the
NOTE:
button, and then skip the remaining steps.
To allow users to edit billing codes, touch the
90 Chapter 3 HP Color LaserJet CM 4540 MFP Series, HP Color LaserJet Enterprise M4555 MFP
Series, HP LaserJet Enterprise 500 MFP Series, HP LaserJet Enterprise 500 Color MFP Series,
and HP LaserJet Enterprise M725 MFP Series
(default)
Save button.
(default)
Save button.
Enable Billing Codes
To disable billing codes, deselect the
Administration
Administration
feature to enable billing codes.
Enable Billing Codes
Allow users to edit billing codes
button.
button.
feature, touch the
feature.
Save
ENWW