Default Job Options; Notification; Stamp Received Faxes (Incoming Faxes) - HP CC487-91209 Fax Manual

Default job options

The following default job options are available for configuration:

Notification

●
Stamp Received Faxes
●
Fit to Page
●
Paper Selection
●
Output Bin
●
Sides
●
NOTE: Default job option settings are shared across all fax methods; analog, LAN, and internet fax.
Notification
This setting controls when the fax call report is printed for incoming faxes.
1. From the Home screen, scroll to and touch the
2. Open the following menus:
Fax Settings
●
Fax Receive Settings
●
Default Job Options
●
Notification
●
3. Touch one of the following notification settings:
Do not notify
●
Notify when job completes
●
Notify only if job fails
●
4. Touch the
mail notification.
5. If you selected the
-or-
If you selected the
Save
6. Touch the

Stamp received faxes (incoming faxes)

The stamp received faxes setting enables or disables stamping incoming faxes. The stamp prints the
received date, time, phone number, and page number on each incoming page.
98 Chapter 3 HP Color LaserJet CM 4540 MFP Series, HP Color LaserJet Enterprise M4555 MFP
Series, HP LaserJet Enterprise 500 MFP Series, HP LaserJet Enterprise 500 Color MFP Series,
and HP LaserJet Enterprise M725 MFP Series
(default)
Print option to receive a printed notification, or touch the
Print option, touch the
E-mail option, use the keyboard to type an e-mail address. Then touch the
button to complete the notification setup.
Include Thumbnail
Administration
Save button to complete the notification setup.
check box to include a thumbnail image with notifications.
button.
E-mail option to receive an e-
ENWW