Set redial-on-no-answer
The redial-on-no-answer setting selects the number of times the fax accessory redials if the number
dialed does not answer. The number of retries is either 0 to 1 (used in the U.S.) or 0 to 2, depending
on the country/region setting. The interval between retries is set by the redial interval setting.
1.
From the Home screen, scroll to and touch the
2.
Open the following menus:
Fax Settings
●
Fax Send Settings
●
Fax Send Setup
●
Fax Dialing Settings
●
3.
Touch the
4.
Enter a value (0–2, default is 0) and then touch the
5.
Touch the
Set the dial tone detection
The detect dial tone setting determines whether the fax checks for a dial tone before sending a fax.
1.
From the Home screen, scroll to and touch the
2.
Open the following menus:
Fax Settings
●
Fax Send Settings
●
Fax Send Setup
●
Fax Dialing Settings
●
3.
Touch the
when selected. The default setting is unchecked (disabled).
4.
Touch the
Set a dialing prefix (if required)
The dialing prefix setting allows you to enter a prefix number (such as a "9" to access an outside line)
when dialing. This prefix number is automatically added to all phone numbers when dialed.
NOTE:
You might need a pause between the prefix and the phone number. To insert a 2–second
pause, enter a comma (,), pound sign (#), or a "P". To add an extension number, use "X".
1.
From the Home screen, scroll to and touch the
2.
Open the following menus:
Fax Settings
●
Fax Send Settings
●
82
Chapter 3 HP Color LaserJet CM 4540 MFP Series, HP Color LaserJet Enterprise M4555 MFP
Series, HP LaserJet Enterprise 500 MFP Series, HP LaserJet Enterprise 500 Color MFP Series,
and HP LaserJet Enterprise M725 MFP Series
Redial On No Answer
text box to display the keypad.
Save
button.
Detect Dial Tone
setting; a checkmark appears next to the
Save
button to enable dial tone detection.
Administration
button.
OK
button.
Administration
button.
Detect Dial Tone
Administration
button.
setting
ENWW