4.
Scroll to and touch
5.
Touch
Print
Clear the fax activity log and billing code report
The fax activity log and the billing code report use the same database. This setting clears the
database and therefore clears both the activity log and the billing report data.
To clear the fax database, complete the following steps.
1.
On the control panel, touch the
2.
Scroll to and touch
3.
Scroll to and touch
4.
Touch
Yes
Print the blocked fax list report
1.
On the control panel, scroll to and touch the
menu.
2.
Scroll to and touch Information.
3.
Scroll to and touch
4.
Touch
Blocked Fax List
Print the speed dial list report
A speed dial list report lists the fax numbers assigned to speed dial names.
1.
On the control panel, scroll to and touch the
menu.
2.
Scroll to and touch Information.
3.
Scroll to and touch
4.
Touch
Speed Dial List
Service settings
These items in the control-panel menus can help with troubleshooting if the corrective action taken
under the Error Codes section is unsuccessful. They are intended to be used when an HP service
representative is assisting you.
Settings in the Initial Setup menu
Open the
Administration
ENWW
Billing Codes
Report.
to print the report.
Administration
Resets
to open the menu.
Clear fax activity
to clear all entries, or touch
Fax Reports
to print the report.
Fax
Reports.
to print the report.
menu, and then select the
icon to open the Fax menu.
log.
No
to exit and retain the entries.
Administration
Administration
Initial Setup
icon to open the Administration
icon to open the Administration
menu. Open the
Fax Setup
Solve fax problems
menu.
53