Set Fit-To-Page; Set The Paper Selection - HP CC487-91209 Fax Manual

1. From the Home screen, scroll to and touch the
2. Open the following menus:
Fax Settings
●
Fax Receive Settings
●
Default Job Options
●
Stamp Received Faxes
●
3. Touch the
the stamp.
4. Touch the

Set fit-to-page

When selecting a page size to print a fax, the product determines the closest page size that matches
the intended size from sizes available in the product. If the fit-to-page setting is enabled and the
received image is larger than that page size, the product attempts to scale the image to fit the page. If
this setting is disabled, an incoming image larger than the page splits across pages.
1. From the Home screen, scroll to and touch the
2. Open the following menus:
Fax Settings
●
Fax Receive Settings
●
Default Job Options
●
Fit to Page
●
3. Touch the
fit-to-page.
4. Touch the

Set the paper selection

Use the paper selection feature to specify which tray the paper for the fax is loaded from.
1. From the Home screen, scroll to and touch the
2. Open the following menus:
Fax Settings
●
Fax Receive Settings
●
Default Job Options
●
Paper Selection
●
3. Touch one of the following options:
ENWW
Disabled option (default) to disable the stamp, or touch the
Save button.
Enabled option (default) to enable fit-to-page, or touch the
Save button.
Administration button.
Administration button.
Disabled
Administration button.
Enabled option to enable
option to disable
Fax settings 99