Mac Filter; Figure 40 Network > Wireless Lan > Mac Filter; Table 32 Network > Wireless Lan > Mac Filter - ZyXEL Communications NBG334S User Manual

Chapter 5 Wireless LAN

5.6 MAC Filter

The MAC filter screen allows you to configure the NBG334S to give exclusive access to up to
32 devices (Allow) or exclude up to 32 devices from accessing the NBG334S (Deny). Every
Ethernet device has a unique MAC (Media Access Control) address. The MAC address is
assigned at the factory and consists of six pairs of hexadecimal characters, for example,
00:A0:C5:00:00:02. You need to know the MAC address of the devices to configure this
screen.
To change your NBG334S's MAC filter settings, click Network > Wireless LAN > MAC
Filter. The screen appears as shown.
Figure 40 Network > Wireless LAN > MAC Filter
The following table describes the labels in this menu.
Table 32 Network > Wireless LAN > MAC Filter
LABEL
Active
Filter Action
82
DESCRIPTION
Select Yes from the drop down list box to enable MAC address filtering.
Define the filter action for the list of MAC addresses in the MAC Address table.
Select Deny to block access to the NBG334S, MAC addresses not listed will be
allowed to access the NBG334S
Select Allow to permit access to the NBG334S, MAC addresses not listed will be
denied access to the NBG334S.
NBG334S User's Guide