Figure 68 Dynamic Dns; Table 49 Dynamic Dns - ZyXEL Communications NBG334S User Manual

Chapter 11 Dynamic DNS

Figure 68 Dynamic DNS

The following table describes the labels in this screen.

Table 49 Dynamic DNS

LABEL
Enable Dynamic DNS
Service Provider
Dynamic DNS Type
Host Name
User Name
Password
Enable Wildcard
Option
Enable off line option
IP Address Update Policy:
Use WAN IP Address
Dynamic DNS server
auto detect IP Address
Use specified IP
Address
Apply
Reset
124
DESCRIPTION
Select this check box to use dynamic DNS.
Select the name of your Dynamic DNS service provider.
Select the type of service that you are registered for from your Dynamic DNS
service provider.
Enter a host names in the field provided. You can specify up to two host
names in the field separated by a comma (",").
Enter your user name.
Enter the password assigned to you.
Select the check box to enable DynDNS Wildcard.
This option is available when CustomDNS is selected in the DDNS Type
field. Check with your Dynamic DNS service provider to have traffic
redirected to a URL (that you can specify) while you are off line.
Select this option to update the IP address of the host name(s) to the WAN IP
address.
Select this option to update the IP address of the host name(s) automatically
by the DDNS server. It is recommended that you select this option.
Type the IP address of the host name(s). Use this if you have a static IP
address.
Click Apply to save your changes back to the NBG334S.
Click Reset to begin configuring this screen afresh.
NBG334S User's Guide