Telnet; Telnet Screen; Figure 83 Telnet Configuration On A Tcp/Ip Network; Figure 84 Management > Remote Mgmt > Telnet - ZyXEL Communications NBG334S User Manual

LABEL
Secured Client IP
Address
Apply
Reset

16.3 Telnet

You can configure your NBG334S for remote Telnet access as shown next. The administrator
uses Telnet from a computer on a remote network to access the NBG334S.

Figure 83 Telnet Configuration on a TCP/IP Network

16.4 Telnet Screen

To change your NBG334S's Telnet settings, click Management > Remote MGMT > Telnet.
The following screen displays.
Figure 84 Management > Remote MGMT > Telnet
NBG334S User's Guide
DESCRIPTION
A secured client is a "trusted" computer that is allowed to communicate with the
NBG334S using this service.
Select All to allow any computer to access the NBG334S using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the NBG334S using this service.
Click Apply to save your customized settings and exit this screen.
Click Reset to begin configuring this screen afresh.
Chapter 16 Remote Management
155