Navigation Panel; Table 5 Screens Summary - ZyXEL Communications NBG334S User Manual

Chapter 2 Introducing the Web Configurator
Table 4 Web Configurator Status Screen (continued)
LABEL
Rate
Summary
Any IP Table
BW MGMT Monitor
DHCP Table
Packet Statistics
WLAN Station Status

2.5.1 Navigation Panel

Use the sub-menus on the navigation panel to configure NBG334S features.
The following table describes the sub-menus.

Table 5 Screens Summary

LINK
Status
Network
Wireless
LAN
WAN
LAN
38
DESCRIPTION
For the LAN ports, this displays the port speed and duplex setting or N/A when the
line is disconnected.
For the WAN port, it displays the port speed and duplex setting if you're using
Ethernet encapsulation and Idle (line (ppp) idle), Dial (starting to trigger a call) and
Drop (dropping a call) if you're using PPPoE or PPTP encapsulation. This field
displays N/A when the line is disconnected.
For the WLAN, it displays the maximum transmission rate when the WLAN is
enabled and N/A when the WLAN is disabled.
Use this screen to view details of IP addresses assigned to devices not in the same
subnet as the NBG334S.
Use this screen to view the NBG334S's bandwidth usage and allotments.
Use this screen to view current DHCP client information.
Use this screen to view port status and packet specific statistics.
Use this screen to view the wireless stations that are currently associated to the
NBG334S.
TAB FUNCTION
This screen shows the NBG334S's general device, system and
interface status information. Use this screen to access the wizard,
and summary statistics tables.
General Use this screen to configure wireless LAN.
MAC Filter Use the MAC filter screen to configure the NBG334S to block
access to devices or block the devices from accessing the
NBG334S.
Advanced This screen allows you to configure advanced wireless settings.
QoS Use this screen to configure Wi-Fi Multimedia Quality of Service
(WMM QoS). WMM QoS allows you to prioritize wireless traffic
according to the delivery requirements of individual services.
Internet This screen allows you to configure ISP parameters, WAN IP
Connection address assignment, DNS servers and the WAN MAC address.
Advanced Use this screen to configure other advanced properties.
IP Use this screen to configure LAN IP address and subnet mask.
IP Alias Use this screen to partition your LAN interface into subnets.
Advanced Use this screen to enable other advanced properties.
NBG334S User's Guide