Selecting System Operation Mode; Figure 117 Ip Address In Ap Mode; Figure 118 Maintenance > Sys Op Mode > General; Figure 119 Maintenance > Sys Op Mode > General: Router - ZyXEL Communications NBG334S User Manual
802.11g wireless firewall router
Hide thumbs
Also See for NBG334S:
- Specifications (2 pages) ,
- User manual (296 pages) ,
- Quick start manual (71 pages)
Table of Contents
Advertisement
Chapter 22 Sys Op Mode
Figure 117 IP Address in AP Mode
22.2 Selecting System Operation Mode
Use this screen to select how you connect to the Internet.
Figure 118 Maintenance > Sys OP Mode > General
If you select Router Mode, the following pop-up message window appears.
Figure 119 Maintenance > Sys Op Mode > General: Router
• In this mode there are both LAN and WAN ports. The LAN Ethernet and WAN Ethernet
ports have different IP addresses.
• The DHCP server on your device is enabled and allocates IP addresses to other devices on
your local network.
• The LAN IP address of the device on the local network is set to 192.168.1.1.
• You can configure the IP address settings on your WAN port. Contact your ISP or system
administrator for more information on appropriate settings.
If you select Access Point the following pop-up message window appears.
200
LAN
1 IP
Internet
NBG334S User's Guide
Advertisement
Table of Contents
Troubleshooting
