Rule Configuration; Figure 80 Management > Bandwidth Mgmt > Advanced: User-Defined Service Rule Configuration; Table 63 Management > Bandwidth Mgmt > Advanced: User-Defined Service Rule Configuration - ZyXEL Communications NBG334S User Manual

Table 62 Management > Bandwidth MGMT > Advanced (continued)
LABEL
Enable
Direction
Service Name
Priority
Modify
Apply
Reset

15.9.1 Rule Configuration

If you want to edit a bandwidth management rule for other applications and/or subnets, click
the Edit icon in the Application List or User-defined Service table of the Advanced screen.
The following screen displays.
Figure 80 Management > Bandwidth MGMT > Advanced: User-defined Service Rule
Configuration
The following table describes the labels in this screen
Table 63 Management > Bandwidth MGMT > Advanced: User-defined Service Rule
NBG334S User's Guide
DESCRIPTION
Select this check box to have the NBG334S apply this bandwidth management
rule.
Select To LAN to apply bandwidth management to traffic that the NBG334S
forwards to the LAN.
Select To WAN to apply bandwidth management to traffic that the NBG334S
forwards to the WAN.
Select To WLAN to apply bandwidth management to traffic that the NBG334S
forwards to the WLAN.
Enter a descriptive name of up to 19 alphanumeric characters, including spaces.
Select a priority from the drop down list box. Choose High, Mid or Low.
Click the Edit icon to open the Rule Configuration screen. Modify an existing rule
or create a new rule in the Rule Configuration screen. See
page 151 for more information.
Click the Remove icon to delete a rule.
Click Apply to save your customized settings.
Click Reset to begin configuring this screen afresh.
Chapter 15 Bandwidth Management
Section 15.9.1 on
151